Tempco’s TEC-9400 Temperature Controller and accessories are used in a wide variety of machinery to maintain process temperatures.
Features
- 1/16 DIN size – 48 mm × 48 mm
- Fuzzy logic PID Autotune heat and cool control
- Universal input, field configurable (Type J T/C default, PT100, mA, V) witih high accuarcy 18-bit D-A
- Countdown display
- RS – 485 and Analog Retransmission Available
- Micro USB Programming Port
- Fast sampling rate (200 msec)
- Manual control & auto-tune function
- Wide range of alarm mode selection
- Lockout protection
- Bumpless transfer during failure mode
- Soft-start ramp & dwell timer
- Bright LCD display using NFPA/IEC standard colors
- High performance with low cost
Downloadable PDF
Part Number & Hardware Code Diagram
To learn more about Tempco’s TEC-9400 Temperature Controller, refer to this data sheet:
Input Range and Sensory Accessories
| Type | Range | Accuracy@25°C | Input Impedance |
|---|---|---|---|
| J | -184 to 1832°F | ±3.6°F | 2.2MΩ |
| J | -120 to 1000°C | ±2.0°C | 2.2MΩ |
| K | -328 to 2498°F | ±3.6°F | 2.2MΩ |
| K | -200 to 1370°C | ±2.0°C | 2.2MΩ |
| T | -418 to 752°F | ±3.6°F | 2.2MΩ |
| T | -250 to 400°C | ±2.0°C | 2.2MΩ |
| E | -148 to 1652°F | ±3.6°F | 2.2MΩ |
| E | -100 to 900°C | ±2.0°C | 2.2MΩ |
| B | 32 to 3272°F | ±3.6°F | 2.2MΩ |
| B | 0 to 1800°C | ±2.0°C | 2.2MΩ |
| R | 32 to 3214°F | ±3.6°F | 2.2MΩ |
| R | 0 to 1767°C | ±2.0°C | 2.2MΩ |
| S | 32 to 3214°F | ±3.6°F | 2.2MΩ |
| S | 0 to 1767°C | ±2.0°C | 2.2MΩ |
| N | -418 to 2372°F | ±3.6°F | 2.2MΩ |
| N | -250 to 1300°C | ±2.0°C | 2.2MΩ |
| L | -328 to 1652°F | ±3.6°F | 2.2MΩ |
| L | -200 to 900°C | ±2.0°C | 2.2MΩ |
| PT100(DIN) | -346 to 1292°F | ±0.7°F | 1.3KΩ |
| PT100(DIN) | -210 to 700°C | ±0.4°C | 1.3KΩ |
| PT100(JIS) | -328 to 1112°F | ±0.7°F | 1.3KΩ |
| PT100(JIS) | -200 to 600°C | ±0.4°C | 1.3KΩ |
| mV | -8 to 70mV | ±0.05% | 2.2MΩ |
| mA | -3 to 27mA | ±0.05% | 70.5Ω |
| VDC | -1.3 to 11.5Vdc | ±0.05% | 650KΩ |
